Washing Machine Cleaning
    How-To· 5 min read

    How to Remove Black Mould From Your Washing Machine Seal

    Black mould on the door gasket is the most common washing machine problem. Here's how to remove it safely without damaging the rubber.

    Black spots on your washing machine door seal are mould — usually Aspergillus or Cladosporium. It's not just unsightly; it transfers spores onto your clothes and can trigger allergies and asthma.

    What you'll need

    • Rubber gloves and a face mask
    • Old toothbrush or soft brush
    • Microfibre cloth
    • White vinegar or oxygen-based cleaner (avoid bleach on rubber long-term)

    Step-by-step removal

    1. Pull back the gasket folds gently and inspect for trapped debris.
    2. Spray the affected area with your chosen cleaner and leave for 10 minutes.
    3. Scrub gently with the toothbrush — never use abrasive pads.
    4. Wipe clean with a damp microfibre cloth.
    5. Run a hot empty cycle to flush residue.

    Prevention

    Always wipe the seal dry after the last wash of the day, leave the door open between uses, and book a professional sanitise service every 6-12 months to reach the back of the gasket where DIY cleaning can't.

    Frequently asked questions

    Can I use bleach to remove mould from the door seal?+

    Bleach kills surface mould but degrades the rubber gasket over time, causing cracks and leaks. Use oxygen-based cleaners or white vinegar for routine cleaning and reserve bleach for severe one-off cases.

    Why does mould keep coming back on my seal?+

    Mould lives in the back folds of the gasket where DIY cleaning rarely reaches. If it returns within weeks, the colony is established behind the visible area and needs a professional strip-down.

    Is the black mould on my seal harmful?+

    It can release spores into the drum that transfer to clothing. People with asthma, eczema or allergies may notice flare-ups linked to a mouldy machine.

    Related articles